Electrical Testing Instruments Manufacturer

The D1110 High-Voltage Insulation Tester has 7 channels, with an output voltage of up to 12000V. It has a large size color screen display that can display voltage and current changes in real time, and has noise suppression function.

• Noise rejection function

• Operates from battery or AC mains supply

• Large color screen display, tough dual case design

• Real time display and record changes of insulation resistance, voltage and current

• 7 channel output voltage(Up to 12000V) IR, IR(t), DAR, PI, SV, DD, Ramp test

Easy to carry out complete tests on medium and high voltage circuit breakers. Analysis can be performed quickly, easily, automatically with only once connect to circuit breakers.

• Timing and travel analyzer

• Coil and motor supply of 2.4 kW

• So many kinds of CB models inside the software

• One step connect, nearly all test results can be get

• Rotary, Linear and Universal transducer are all standard configuration

• Easy-to-read display

• High current and accuracy

• Light weight,easy to carry out

• Easy to get paper results on field

• 30A-100A current output for different use

Mini-WDT sweep frequency response analyzer uses frequency analysis to evaluate whether a transformer has suffered mechanical damage and complies with IEC60076-18.

• Meet IEC 60076-18 standard

• Portable and light-weight for easy use

• Analysis software allows further diagnostics

• Reproducible results thanks to innovative connection technique

DRT3XXL series automated six-winding transformer ohmmeter delivers full eight-terminal resistance measurement capability. Widely used in field testing of CT\PT power transformer windings, verifying factory winding resistance test results, etc.

• Built-in printer

• Built-in auto-demagnetization

• DC test current up to 20A(DRT-320L)、40A(DRT-340L)

• One-time connection principle results in faster setup time eliminating safety risk

• Automated eight-terminal/six-winding measurement capability

• Simultaneous winding magnetization for fast and accurate dc winding resistance measurements of high inductive loads

A portable transformer ohmmeter with an accuracy of ±(reading×0.2%+2) can be used to test transformers, shunt reactors, etc. for low current resistance measurement.

• DC test current up to 10A

• 5.6-inch color LED screen

• Built-in battery(Optional)

• Wide measurement range (500uΩ ~ 50kΩ) and high accuracy

• DC test current up to 20A, 40A, and 50A for different models

• 7-inch full-color touch display for easy operation and viewing

• Auto resistance-rate calculation at 5s, 15s, and 30s intervals

• Ground-wire disconnection alarm function (DCR40/DCR50 only)

The AC voltage test sets are suitable for kinds of electrical products, electrical equipments and insulated materials, testing the insulated level of products, discovering the insulated situation of tested objects.

• Separate control and HV units

• Continuously adjustable voltage

• DC testing via a rectifier

• In-built over-current protection

Through the reactor of the combined device, it can output stable AC high voltage, which is mostly used for AC voltage withstand test of on-site electrical equipment, such as cross-linked cables, transformers, GIS, motors and generators.

• Lower input power requirement

• Pure AC Sine Wave at output

• Easy to combine reactor to output different voltage.

The K640 thermal camera module uses an uncooled infrared detector with high thermal sensitivity to accurately detect temperature changes. Can support multiple interfaces and real-time image output, and can be easily integrated into various detection systems and monitoring platforms.

• IR resolution 640*512

• Type-C port, quick adaptation

• Different color palettes & image modes

• Battery-free，little power less than 0.53W